Sintered stone · 岩板大板
Sintered Stone Slabs
Sintered stone slabs up to 3,200 × 1,600 mm, supplied wholesale to fabricators, importers and project buyers. We stock the large formats that kitchen and furniture programmes need and cut them to size in Yunfu, so you can buy full slabs or finished pieces from the same supplier.


Why fabricators buy sintered stone by the slab
Sintered stone is pressed and fired, not quarried — which means the pattern repeats predictably and the colour does not shift between batches the way marble does. For a fabricator that is the whole point: a 40-unit apartment programme can be quoted and delivered without the slab-matching conversation that eats a week on natural stone.
The trade-off is that it cannot be worked like stone. It is cut with diamond tooling, edges are mitred rather than built up, and a chip cannot be polished out. Buyers who understand that get excellent yield; buyers who treat it like quartz end up with cracked pieces at the sink cutout.
Formats and thicknesses, and which one to order
6 mm is for wall cladding, cabinet doors and furniture fronts where weight matters — usually bonded to a substrate. 9 mm is the workhorse for furniture tops and splashbacks. 12 mm is what most kitchens use, because it takes a sink cutout and an overhang without a build-up.
We supply full slabs and cut-to-size pieces from the same stock, so a programme that needs both a 3,200 mm island and 20 vanity tops does not need two suppliers. If you are specifying, tell us the overhang and the cutout positions — that decides the thickness faster than any brochure.
Cutting, packing and the failure modes we avoid
Sintered slabs ship vertically on A-frames, never flat-stacked, and are crated for forklift handling. Every cut is programmed from your DXF; we do not hand-cut sintered stone because a wandering blade shows as a chipped edge that no amount of polishing hides.
Before packing we check each piece for edge chipping under raking light and photograph the pallet as loaded. If a piece is damaged in transit, the photo set is what settles the claim — which is why we keep it, even though nobody asks for it until something goes wrong.
Typical sintered stone programmes
12 mm tops with mitred waterfall edges, sink and hob cutouts from template.
6 and 9 mm panels bonded to substrate, drilled and edge-finished.
Large format panels with matched vein direction across the elevation.
Vanity tops with integrated basins or undermount cutouts, matching upstands.
Sintered stone slab FAQ
Both are pressed and fired ceramic bodies; "sintered stone" is the marketing name used for the denser, large-format product aimed at furniture and worktops. Ask for the technical sheet rather than the name — density, water absorption and flexural strength tell you what you are actually buying.
Yes, with caveats. It is UV stable and frost resistant, but dark colours heat up in direct sun, and any impact damage is permanent. For outdoor kitchens we usually recommend 12 mm and a lighter colour.
Yes — cut samples of the current range, with the batch reference so the production slab matches what you approved.
One container is the practical minimum for full slabs. Smaller mixed orders can ship LCL, quoted case by case.
Related pages
Need a slab programme quoted?
Send the formats, thicknesses and quantities — we reply with availability, loading plan and price within 24 hours.
