Surface selection guide
Five stone surfaces, compared honestly
Marble, engineered quartz, granite, sintered stone and travertine are not interchangeable — each one fails in a different way. This page is the short version of what we tell buyers before they commit to a container. If you would rather skip the reading, send us your project and we will recommend one.
The one-minute comparison
If you only read one row: quartz and sintered stone are the low-maintenance workhorses, granite is the heat-proof outdoor veteran, marble is the material you choose with your eyes, and travertine is the textured, warm-toned option that needs the most care.
| Surface | Hardness (Mohs) | Porosity | Heat | Outdoor | Maintenance |
|---|---|---|---|---|---|
| Marble | 3–4 | Low–medium, etches on acid | Good | Yes, with sealer | Seal yearly |
| Engineered quartz | 6–7 | Non-porous | Resin sensitive | Not advised | Wipe clean |
| Granite | 6–7 | Very low | Excellent | Yes | Seal every 1–2 years |
| Sintered stone | 6–7 | Non-porous | Excellent | Yes, UV stable | Wipe clean |
| Travertine | 3–4 | High unless filled | Good | Yes, with sealer | Seal and fill |
Typical values for commercially available slabs. Exact figures vary by quarry, batch and finish — we send the test report for your specific lot on request.
Pick by what you are building
Marble
Calacatta, Carrara, Statuario and Nero Marquina. Book-matched islands, vanity tops and feature walls where the veining is the point.
Marble surfaces →Engineered quartz
Consistent colour, non-porous, zero-silica options with an SGS report. The default specification for volume kitchen programmes.
Quartz surfaces →Granite
Absolute Black, Steel Grey, Tan Brown. Heat tolerant, frost resistant, and the most forgiving surface for outdoor kitchens.
Granite surfaces →Sintered stone
Large-format slabs up to 3,200 × 1,600 mm, zero porosity, UV stable. The material for façades, outdoor islands and thin worktops.
Sintered stone →Travertine
Walnut, Classic and Silver. Filled and honed for vanity tops, vein-cut for dining tables and plinths.
Travertine surfaces →Not sure yet?
Tell us the application, climate and budget band. We come back with one recommendation and two fallbacks — not a catalogue dump.
Talk to an engineer →What actually decides the choice
In twelve years of quoting export orders, four questions settle almost every material decision:
- Will it see acid? If the surface is a working kitchen with citrus, wine and vinegar, marble and travertine will etch. Quartz, granite and sintered stone will not.
- Will it see direct sun? Quartz resin can yellow outdoors. Sintered stone and granite are UV stable.
- Will it see a hot pan? Granite and sintered stone shrug it off. Quartz needs a trivet; marble tolerates heat but stains.
- How thin does it need to be? Only sintered stone is routinely fabricated at 6 mm for cladding and furniture, which changes the whole detail set.
Get those four answers right and the aesthetics become a free choice rather than a compromise.
Material questions we get every week
For daily kitchen abuse, sintered stone and engineered quartz are the most resistant to scratching, staining and moisture. Sintered stone additionally tolerates heat and UV without discolouring; quartz is harder to chip but its resin binder can be damaged by a hot pan.
Marble etches when it meets acid — lemon juice, vinegar, wine — and it scratches more easily than quartz or granite. It is still the material most buyers choose for visual impact, and it performs well in bathrooms, on islands used for serving, and on furniture. We seal every marble top before packing and recommend re-sealing once a year.
Sintered stone and granite are the safe outdoor choices: both are UV stable and frost resistant. Quartz can yellow under prolonged direct sun because of its resin content, and travertine needs sealing and freeze-thaw protection in cold climates.
Yes. Send a slab photo, a sample, a drawing or a competitor's SKU and we will confirm availability, thickness options and finish — polished, honed, leathered, brushed or matte — before quoting.
Tell us the application, we will pick the surface
Send drawings, a slab photo or a physical template. You get material selection, pricing and lead time within 24 hours.
