Natural stone · Metamorphic
Marble countertops and vanity tops, book-matched in our own shop
Calacatta, Carrara, Statuario and Nero Marquina — cut to size, vein-matched and sealed in Yunfu, China. We fabricate marble for importers, kitchen studios and hotel projects, from a single vanity top to a 3,200 mm waterfall island. Send your drawing for pricing within 24 hours.
Why buyers still specify marble
Marble is recrystallised limestone: calcite that has been squeezed and heated until the grain becomes interlocking and the impurities stretch into veins. That geology is why no two slabs repeat, and it is the entire reason the material sells. Engineered surfaces can imitate a Calacatta pattern, but they cannot imitate the depth of a vein that disappears into the stone.
The trade-off is chemical. Calcite reacts with acid, so lemon juice, vinegar, wine and most bathroom descalers will dull a polished surface permanently. That is not a defect — it is what marble is. We tell buyers this before they order, and we recommend the applications where it does not matter: vanity tops, low-traffic islands, dining and console tables, fireplace surrounds and feature walls.
What we keep in production
- Calacatta — white ground, bold grey and gold veining. The premium choice for book-matched islands.
- Carrara — soft blue-grey, fine dense veining. Forgiving on large surfaces where a strong pattern would overwhelm.
- Statuario — brighter than Carrara, dramatic directional veins, traditionally used for sculpture-grade work.
- Nero Marquina — black with white veining; shows water marks easily, so best on vertical or low-use surfaces.
- Arabescato and Breccia variants on request, subject to block availability.
Finishes: polished, honed, brushed and split-face. Honed is the practical choice for bathroom floors and for buyers who dislike the mirror look; polished remains the default for tops.
Technical data
| Property | Typical value | What it means in practice |
|---|---|---|
| Composition | Calcite / dolomite (CaCO₃) | Acid sensitive — will etch, sealer cannot prevent it |
| Mohs hardness | 3–4 | Knives and ceramic plates can scratch a polished face |
| Water absorption | 0.1–0.5% | Low but not zero; seal before use in wet areas |
| Density | 2.6–2.8 g/cm³ | Heavy — 30 mm tops need proper cabinet and bracket support |
| Heat | Tolerates moderate heat | Hot pans are fine; thermal shock from ice water is not |
| Thickness we cut | 18 / 20 / 30 mm, laminated edges up to 60 mm | Edge build-up gives the look of solid 60 mm without the weight |
| Max slab | 3,200 × 1,600 mm | Oversized islands are mitred, not butt-joined |
Values are typical for commercial blocks. We issue the actual test report for your lot before shipment.
Where marble earns its keep
Single and double basins, integrated or undermount, with 60 mm laminated aprons. The strongest marble application in the house — low acid exposure, high visual payoff.
Book-matched tops with mitred waterfall ends. We dry-lay the three pieces together before cutting so the vein runs continuously through the corner.
Dining tables, coffee tables, console tops and plinths in 20 mm with reinforced edges. See the furniture range.
How we fabricate and inspect marble
Every order follows the same path: block or slab selection against your reference photo, dry-lay layout with vein direction marked, CNC waterjet cutting, edge profiling, pinhole filling with colour-matched resin, then polishing. Before packing, each piece is checked individually — dimensions against the drawing, edge profile, colour consistency against the approved slab, and a full dry-lay photograph set that you approve before the container is sealed.
Export packing is a wooden crate with foam corner protection and A-frame separation, fumigated and documented for sea freight. We ship EXW, FOB and CIF; typical lead time is three to four weeks per 20-foot container after deposit and drawing approval.
Related surfaces
Marble FAQ
Yes. We impregnate every top with a solvent-based sealer before packing, which buys roughly 12 months of normal kitchen use. After that, re-sealing once a year is enough. Sealer slows staining but does not stop acid etching — no sealer does.
Calacatta has a bright white background with bold, widely spaced grey and gold veining; Carrara has a softer blue-grey background with finer, denser veining. Calacatta is scarcer and more expensive, and its dramatic pattern makes book-matching far more visible on an island.
Polished marble becomes slippery and shows water spots when wet, so for shower floors we recommend honed or brushed finishes with a penetrating sealer. On vanity tops marble performs well as long as acidic cleaners are avoided.
The top and both side panels are cut from the same slab block and laid out dry on the floor before fabrication, so vein direction is confirmed on the actual pieces. Joints are mitred rather than butt-joined, which keeps the pattern continuous through the corner.
Send us your marble drawing
Share a plan, a slab photo or a physical template. Our engineers reply with material selection, pricing and lead time within 24 hours.
