宝晟石材 Boson Stone
Home/Materials/Quartz

Engineered stone · Non-porous

Engineered quartz countertops for programmes that repeat

Non-porous, Mohs 6–7, zero-silica grade available with an SGS report. Quartz is the surface we recommend when an order has to look identical in container five as it did in container one. Send your specification for a quote within 24 hours.

6–7Mohs hardness
90%+Quartz content
3,200mmMax slab length
0.02%Water absorption

What engineered quartz actually is

Quartz surfacing is a manufactured slab: roughly 90–93% crushed quartz aggregate bound in 7–10% polymer resin with pigments, pressed under vacuum and cured. The aggregate supplies hardness; the resin supplies the non-porous skin and the colour consistency. Nothing about it is mined as a finished surface, which is exactly why it behaves so predictably — and why importers running repeat programmes prefer it.

The trade-off is heat. Resin softens and discolours around 150 °C, so a pan straight off the hob will leave a mark that cannot be polished out. A trivet solves it entirely, but your end customer has to know. We print that instruction on the care card that ships with every container.

Quartz is also the material where silica regulation matters. Dry-cutting conventional quartz releases respirable crystalline silica; several markets now restrict it. Our zero-silica series carries an SGS test report, and we supply the report with the shipment rather than on request.

Where quartz wins

Volume kitchen programmes

Colour and pattern hold across batches, so a developer's 200th kitchen matches the first. This is the single biggest reason buyers move from natural stone to quartz.

Rental and hospitality

No sealing schedule, no etching, no stain callbacks. Housekeeping wipes it with neutral detergent and the surface is done.

White and marble-look schemes

Pure white, Calacatta-look, grey and black. The look of stone without the acid sensitivity — see kitchen countertops and vanity tops.

Technical data

PropertyTypical valueWhat it means in practice
Composition≈90–93% quartz + resinConsistent colour; zero-silica grades available
Mohs hardness6–7Resists knife marks; ceramic and diamond still scratch it
Water absorption≈0.02%Non-porous — no sealing, no staining
Heat resistanceUp to ≈150 °C with trivetHot pans and crockpots must not sit directly on the surface
UV stabilityNot UV stableIndoor use only; outdoor schemes should use sintered stone or granite
Thickness we cut20 / 30 mm, laminated edges to 60 mmStandard 20 mm with 40 mm apron is the volume specification
Max slab3,200 × 1,600 mmIslands up to 3.2 m in one piece

Values are typical for the grades we stock. Ask for the test report on your specific colour and batch.

How we fabricate and inspect quartz

Slabs are cut on CNC saws and waterjet, edges profiled and polished, sink cutouts made from your template or DXF. Seams are planned at the drawing stage — quartz seams are visible, so we position them away from sightlines and match the joint colour. Each piece is measured against the drawing, the edge profile is checked with a gauge, and the packed container is photographed before sealing.

Packing is a wooden crate with foam corners and A-frame separation. Lead time is three to four weeks per 20-foot container after deposit and drawing approval; EXW, FOB and CIF terms are all available.

Related surfaces

Marble Granite Sintered stone Travertine Compare all five

Quartz FAQ

Conventional engineered quartz contains 90% or more crystalline silica, a respirable hazard when cut dry. Zero-silica grades replace most of that crystalline content with alternative minerals while keeping strength and the non-porous surface. Our quartz series carries a third-party SGS zero-silica test report; the sintered stone line is CNAS certified.

No. The resin binder makes engineered quartz non-porous, so there is nothing for a sealer to penetrate. Warm water and a pH-neutral detergent are sufficient. Avoid bleach-heavy or abrasive cleaners, which dull the finish over time.

We do not recommend it. The polymer resin can yellow under prolonged UV exposure and is more vulnerable to thermal shock outdoors. For outdoor kitchens use granite or sintered stone.

This is quartz's main advantage over natural stone. Because the mix is batched, we can hold the same pigment recipe and slab format across repeat orders. We retain a sample from your first shipment and match subsequent batches against it.

Specifying quartz for a repeat programme?

Send the colour reference, thickness and annual volume. We will confirm grade, report availability and container lead time within 24 hours.

Request a quote WhatsApp